Parameter confirmation
- pressure, displacement and duty cycle
- fluid type and suction or discharge arrangement
- drive, skid and transport configuration
- maintenance access and spare-parts requirements
Product parameters
| Model | STP1600ML | SQP2200M | SQP2800M |
|---|---|---|---|
| Rated input | 1600(1193) | 2200(1641) | 2800 n.c. |
| power hp(kW) | |||
| Rated stroke-1/min | 120 | 135 | 107 |
| Stroke in. (mm) | 12"(304.8) | 12"(304.8) | 304.8 |
| Max.rated | 39.9 (7" Liner) | 97.7 (7.5" Liner) | 69.2(7" Liner) |
| displacement L/s | |||
| Max. WP MPa | 51.7(5" Liner) | 51.8 (4" Liner) | 51.7(5" Liner) |
| LxWxH mm | 6000×2675x2882 | 8025×3673×2929 | 6000×3487×2935 |
| Pump weight t | 28 | 66 | 42 (w/o charging |
| system) |
Pumping Unit
Technical profile
To meet the requirements of high formation pressure in ultra-deep Wells and efficiency drilling speed, STP1600M and STP2200M high pressure drilling pumps have been developed to effectively improve the processing capacity of solid control system.
At a glance
Key specifications
Rated input1600(1193) / 2200(1641) / 2800 n.c.
power hp(kW) / /
Rated stroke-1/min120 / 135 / 107
Stroke in. (mm)12"(304.8) / 12"(304.8) / 304.8
The available technical data for Drilling Mud Pump covers Rated input, power hp(kW), Rated stroke-1/min, Stroke in. (mm), Max.rated. Use these fields to compare the listed configuration with the project duty, site interface and delivery requirements before requesting a final quotation.
Capture the long stroke, low SPM and L-shape fluid end, manifold forging technology, improve the service life of high pressure drillingpump and pressure resistance.
Combined with the operating conditions of in-service drilling pump,optimize the structure, upgrade the material, improve the performance of supporting accessories and consumable parts.
Request technical details ?Specification review
Confirm the oilfield pumping equipment duty for Drilling Mud Pump before quotation.
Drilling Mud Pump is intended for fluid transfer, drilling circulation, cementing and stimulation support. Review the actual well program, site interface and operating environment before approving a final technical configuration.
Configuration selection
- pump and fluid-end arrangement selected around the duty point
- drive package matched to the available power source
- skid and connection layout coordinated
- service access and consumables reviewed
The current product record provides these technical fields for review: Rated input, power hp(kW), Rated stroke-1/min, Stroke in. (mm), Max.rated. Match the listed values with the required duty point and request confirmation for any interface or operating condition not shown.
Engineering context
What to confirm before quotation.
Pump selection should match pressure, displacement, fluid type, stroke, power source, maintenance access and supporting manifolds.
Drilling-Fluid CirculationBalance circulation rate, debris transport and pressure control so the string reaches the target section cleanly.
Workover SupportConfirm temperature, altitude, corrosion exposure, access and maintenance conditions before freezing the specification.
High-Pressure Pumping PackagesMatch rated pressure and displacement to the job program, fluid properties and required duty cycle.
Quality and documentation
Request the pumping evidence package for Drilling Mud Pump.
For Drilling Mud Pump, quality and delivery review should be tied to the final configuration rather than general claims. Ask for the applicable inspection scope, dimensional information, test records and supplied documentation before purchase approval.
Quality review
- Confirm the inspection points, test scope and acceptance documents applicable to the ordered configuration.
Technical materials
- Request the pumping equipment datasheet for this model.
- Request the pump curve or performance sheet when available for this model.
- Request the GA drawing for this model.
Delivery readiness
- Confirm package dimensions, lifting or transport requirements, installation interfaces and the documents supplied with delivery.
Buyer questions
Questions to settle before purchase.
What pressure and displacement range is required?
For Drilling Mud Pump, the table above confirms displacement L/s: / / . Use that figure as the baseline and verify the final duty cycle, safety margin and installation interface before release.
Which fluid-end and power configuration is suitable?
For Drilling Mud Pump, the configuration must match transport limits, rig-up time, power availability and maintenance access. Confirm the preferred mounting form before final quotation.
What supporting skid, manifold or control package is needed?
For Drilling Mud Pump, the configuration must match transport limits, rig-up time, power availability and maintenance access. Confirm the preferred mounting form before final quotation.
Direct inquiry
Send the Drilling Mud Pump requirement.
For Drilling Mud Pump, include the model, application, required duty, quantity and delivery destination. For a faster technical response, also include the pressure, displacement and duty cycle; fluid type and suction or discharge arrangement; drive, skid and transport configuration.
Request product detailsConfiguration support
Need a different pumping unit configuration for Drilling Mud Pump?
Share the operating conditions and delivery constraints. We will help confirm the most practical equipment layout.