Parameter confirmation
- working pressure and required displacement
- pump, blending and manifold arrangement
- fluid, proppant and additive handling
- continuous duty, power and transport limits
Product parameters
| Product model | SHS40DQ | SHS32 |
|---|---|---|
| Max. water displacement | 2×20m /min(clear water) | 32m2/min (20+12m/min) |
| Rated voltage | 380V | 380V |
| Overall dimensions | 10.5x2.5x2.9m | ≤9×2.8x3m |
| Weight | 25t | ≤22t |
| Max. sand transport capacityy | 8m/min | 7.5m2/min |
| Working conditions | 24h/d, 7d/week | 24h/d, 7d/week |
Fracturing Equipment
Technical profile
In January 2023, the 8000 electric fracturing skid was installed on the Huaye 4 platform of Jiangsu Oilfield, with a construction pressure of 75-85MPa and a displacement of 2.1-2.5m2/min, with a maximum continuous operation time of 5 hours, and reliable equipment performance.
At a glance
Key specifications
Max. water displacement2×20m /min(clear water) / 32m2/min (20+12m/min)
Rated voltage380V / 380V
Overall dimensions10.5x2.5x2.9m / ≤9×2.8x3m
Weight25t / ≤22t
The available technical data for SYL8000DQ Electric Fracturing Skid covers Max. water displacement, Rated voltage, Overall dimensions, Weight, Max. sand transport capacityy. Use these fields to compare the listed configuration with the project duty, site interface and delivery requirements before requesting a final quotation.
Innovatively developed a domestically produced 6000V motor and a"one driven two" structure variable frequency control system, filling the technical gap of the 6000V fracturing electric transmission system in China.
Optimize the overall layout and lubrication technology, and develop a domestic maximum power 8000 electric fracturing skid, with one capable of replacing three conventional 2500 oil drive fracturing trucks.
Request technical details ?Specification review
Confirm the fracturing equipment duty for SYL8000DQ Electric Fracturing Skid before quotation.
SYL8000DQ Electric Fracturing Skid is intended for well stimulation, fracturing fluid delivery and continuous mixing support. Review the actual well program, site interface and operating environment before approving a final technical configuration.
Configuration selection
- pump configuration matched to pressure and displacement duty
- sand blending, additive and manifold interfaces reviewed as a package
- electric, truck or skid arrangement checked against site power
- fluid-end and maintenance access confirmed
The current product record provides these technical fields for review: Max. water displacement, Rated voltage, Overall dimensions, Weight, Max. sand transport capacityy. Match the listed values with the required duty point and request confirmation for any interface or operating condition not shown.
Engineering context
What to confirm before quotation.
Pressure, displacement, duty cycle, power utilization, noise, sand rate and control architecture should be reviewed together.
Shale And Tight-Gas StimulationMatch pumping rate, treatment pressure and chemical compatibility to the intervention program.
Large-Platform Multi-Well OperationsCheck platform footprint, lifting points, marine protection and interface responsibilities with the project team.
Electric Fracturing And Sand BlendingConfirm temperature, altitude, corrosion exposure, access and maintenance conditions before freezing the specification.
Quality and documentation
Request the fracturing evidence package for SYL8000DQ Electric Fracturing Skid.
For SYL8000DQ Electric Fracturing Skid, quality and delivery review should be tied to the final configuration rather than general claims. Ask for the applicable inspection scope, dimensional information, test records and supplied documentation before purchase approval.
Quality review
- Confirm the inspection points, test scope and acceptance documents applicable to the ordered configuration.
Technical materials
- Request the fracturing equipment datasheet for this model.
- Request the fluid-end and manifold configuration sheet for this model.
- Request the GA drawing for this model.
Delivery readiness
- Confirm package dimensions, lifting or transport requirements, installation interfaces and the documents supplied with delivery.
Buyer questions
Questions to settle before purchase.
What pressure and displacement are needed for the stimulation program?
For SYL8000DQ Electric Fracturing Skid, the table above confirms Max. water displacement: 2×20m /min(clear water) / 32m2/min (20+12m/min). Use that figure as the baseline and verify the final duty cycle, safety margin and installation interface before release.
Is electric, diesel, truck, trailer or skid-mounted equipment preferred?
For SYL8000DQ Electric Fracturing Skid, the configuration must match transport limits, rig-up time, power availability and maintenance access. Confirm the preferred mounting form before final quotation.
What sand transport and continuous mixing capacity is required?
For SYL8000DQ Electric Fracturing Skid, the table above confirms Max. water displacement: 2×20m /min(clear water) / 32m2/min (20+12m/min). Use that figure as the baseline and verify the final duty cycle, safety margin and installation interface before release.
Direct inquiry
Send the SYL8000DQ Electric Fracturing Skid requirement.
For SYL8000DQ Electric Fracturing Skid, include the model, application, required duty, quantity and delivery destination. For a faster technical response, also include the working pressure and required displacement; pump, blending and manifold arrangement; fluid, proppant and additive handling.
Request product detailsConfiguration support
Need a different fracturing layout or pumping package for SYL8000DQ Electric Fracturing Skid?
Share the pressure target, displacement, blending arrangement and transport limit. We will help confirm the right stimulation package.