Parameter confirmation
- working pressure and required displacement
- pump, blending and manifold arrangement
- fluid, proppant and additive handling
- continuous duty, power and transport limits
Product parameters
| Product model | SHS40DQ | SHS32 |
|---|---|---|
| Max. water displacement | 2×20m /min(clear water) | 32m2/min (20+12m/min) |
| Rated voltage | 380V | 380V |
| Overall dimensions | 10.5x2.5x2.9m | ≤9×2.8x3m |
| Weight | 25t | ≤22t |
| Max. sand transport capacityy | 8m/min | 7.5m2/min |
| Working conditions | 24h/d, 7d/week | 24h/d, 7d/week |
Fracturing Equipment
Technical profile
SJ Petroleum Machinery Co., has solved the problems of low power utilization rate, short service life and insufficient pressure of equipment, and innovated the totally integrated technologies of fracturing equipment powered by ten-motordriving system. The world's first set of SCF8000 continuous full-load all-electric fracturing skid with maximum horsepower to solve the problems of difficult in power increase, high energy consumption, high operation and maintenance cost of fracturing equipment.
At a glance
Key specifications
Max. water displacement2×20m /min(clear water) / 32m2/min (20+12m/min)
Rated voltage380V / 380V
Overall dimensions10.5x2.5x2.9m / ≤9×2.8x3m
Weight25t / ≤22t
The available technical data for SCF8000 continuous full load all electric fracturing skid covers Max. water displacement, Rated voltage, Overall dimensions, Weight, Max. sand transport capacityy. Use these fields to compare the listed configuration with the project duty, site interface and delivery requirements before requesting a final quotation.
well/platform).
Request technical details ?Specification review
Confirm the fracturing equipment duty for SCF8000 continuous full load all electric fracturing skid before quotation.
SCF8000 continuous full load all electric fracturing skid is intended for well stimulation, fracturing fluid delivery and continuous mixing support. Review the actual well program, site interface and operating environment before approving a final technical configuration.
Configuration selection
- pump configuration matched to pressure and displacement duty
- sand blending, additive and manifold interfaces reviewed as a package
- electric, truck or skid arrangement checked against site power
- fluid-end and maintenance access confirmed
The current product record provides these technical fields for review: Max. water displacement, Rated voltage, Overall dimensions, Weight, Max. sand transport capacityy. Match the listed values with the required duty point and request confirmation for any interface or operating condition not shown.
Product views
Additional views of SCF8000 continuous full load all electric fracturing skid.
These images are supplied for the same product title and are shown as supporting views for technical review.
Engineering context
What to confirm before quotation.
Pressure, displacement, duty cycle, power utilization, noise, sand rate and control architecture should be reviewed together.
Shale And Tight-Gas StimulationMatch pumping rate, treatment pressure and chemical compatibility to the intervention program.
Large-Platform Multi-Well OperationsCheck platform footprint, lifting points, marine protection and interface responsibilities with the project team.
Electric Fracturing And Sand BlendingConfirm temperature, altitude, corrosion exposure, access and maintenance conditions before freezing the specification.
Quality and documentation
Request the fracturing evidence package for SCF8000 continuous full load all electric fracturing skid.
For SCF8000 continuous full load all electric fracturing skid, quality and delivery review should be tied to the final configuration rather than general claims. Ask for the applicable inspection scope, dimensional information, test records and supplied documentation before purchase approval.
Quality review
- Confirm the inspection points, test scope and acceptance documents applicable to the ordered configuration.
Technical materials
- Request the fracturing equipment datasheet for this model.
- Request the fluid-end and manifold configuration sheet for this model.
- Request the GA drawing for this model.
Delivery readiness
- Confirm package dimensions, lifting or transport requirements, installation interfaces and the documents supplied with delivery.
Buyer questions
Questions to settle before purchase.
What pressure and displacement are needed for the stimulation program?
For SCF8000 continuous full load all electric fracturing skid, the table above confirms Max. water displacement: 2×20m /min(clear water) / 32m2/min (20+12m/min). Use that figure as the baseline and verify the final duty cycle, safety margin and installation interface before release.
Is electric, diesel, truck, trailer or skid-mounted equipment preferred?
For SCF8000 continuous full load all electric fracturing skid, the configuration must match transport limits, rig-up time, power availability and maintenance access. Confirm the preferred mounting form before final quotation.
What sand transport and continuous mixing capacity is required?
For SCF8000 continuous full load all electric fracturing skid, the table above confirms Max. water displacement: 2×20m /min(clear water) / 32m2/min (20+12m/min). Use that figure as the baseline and verify the final duty cycle, safety margin and installation interface before release.
Direct inquiry
Send the SCF8000 continuous full load all electric fracturing skid requirement.
For SCF8000 continuous full load all electric fracturing skid, include the model, application, required duty, quantity and delivery destination. For a faster technical response, also include the working pressure and required displacement; pump, blending and manifold arrangement; fluid, proppant and additive handling.
Request product detailsConfiguration support
Need a different fracturing layout or pumping package for SCF8000 continuous full load all electric fracturing skid?
Share the pressure target, displacement, blending arrangement and transport limit. We will help confirm the right stimulation package.