Parameter confirmation
- working pressure and displacement
- slurry density and mixing arrangement
- truck, trailer or skid mounting
- power source and site access
Product parameters
| Model | Max.WP MPa(psi) | Max.Displacement L/min(GPM) |
|---|---|---|
| SGJ600-13(GJC70-13) | 70(10100) | 1274(336) |
| SGJ600-17(GJC55-17) | 55(7976) | 1662(440) |
| SGJ600-21(GJC45-21) | 45(6526) | 2105(558) |
| SGJ600-30(GJC100-30) | 99.7(14456) | 3041(803) |
| SGJ600-33(GJC70-33) | 70(10100) | 3379(893) |
| SGJ600-37(GJC55-37) | 55(7976) | 3767(996) |
| SGJ600-42(GJC45-42) | 45(6526) | 4210(1112) |
Cementing Equipment
Technical profile
SGJQ600-30D electric drive cementing skid is driven by 400kW/600V variable frequency speed regulating device, with stable power supply and high drive efficiency, the wellsite grid electricity or rig electricity could be used, the operation is green and low carbon and good forenvironmental protection.
At a glance
Key specifications
SGJ600-13(GJC70-13)70(10100) / 1274(336)
SGJ600-17(GJC55-17)55(7976) / 1662(440)
SGJ600-21(GJC45-21)45(6526) / 2105(558)
SGJ600-30(GJC100-30)99.7(14456) / 3041(803)
The available technical data for SGJ600 30D Electric drive cementing skid covers SGJ600-13(GJC70-13), SGJ600-17(GJC55-17), SGJ600-21(GJC45-21), SGJ600-30(GJC100-30), SGJ600-33(GJC70-33). Use these fields to compare the listed configuration with the project duty, site interface and delivery requirements before requesting a final quotation.
Two STP600 plunger pump are combined, operation is stable and reliable, maximum pressure can reach 82.3MPa and Max. displacemet is3000L/min.
Request technical details ?Specification review
Confirm the cementing equipment duty for SGJ600 30D Electric drive cementing skid before quotation.
SGJ600 30D Electric drive cementing skid is intended for cement placement, slurry mixing and well construction support. Review the actual well program, site interface and operating environment before approving a final technical configuration.
Configuration selection
- pump arrangement matched to the cementing program
- mixing and additive handling reviewed with the slurry design
- transport or skid integration checked against the site interface
- power and control connections confirmed
The current product record provides these technical fields for review: SGJ600-13(GJC70-13), SGJ600-17(GJC55-17), SGJ600-21(GJC45-21), SGJ600-30(GJC100-30), SGJ600-33(GJC70-33). Match the listed values with the required duty point and request confirmation for any interface or operating condition not shown.
Engineering context
What to confirm before quotation.
Selection should start with working pressure, displacement, slurry density control, mounting form and the available power source.
Primary CementingConfirm slurry density, displacement and zonal isolation so the cement program matches the well objective.
Deep And High-Pressure WellsMatch rated pressure and displacement to the job program, fluid properties and required duty cycle.
Long Horizontal And Loss-Prone FormationsCheck placement efficiency, fluid-loss control and circulation stability before freezing the package.
Quality and documentation
Request the cementing evidence package for SGJ600 30D Electric drive cementing skid.
For SGJ600 30D Electric drive cementing skid, quality and delivery review should be tied to the final configuration rather than general claims. Ask for the applicable inspection scope, dimensional information, test records and supplied documentation before purchase approval.
Quality review
- Confirm the inspection points, test scope and acceptance documents applicable to the ordered configuration.
Technical materials
- Request the cementing equipment datasheet for this model.
- Request the GA drawing for this model.
- Request the pump and mixing configuration sheet for this model.
Delivery readiness
- Confirm package dimensions, lifting or transport requirements, installation interfaces and the documents supplied with delivery.
Buyer questions
Questions to settle before purchase.
What working pressure and displacement are required for this cementing job?
For SGJ600 30D Electric drive cementing skid, the supplied sheet covers SGJ600-13(GJC70-13), SGJ600-17(GJC55-17), SGJ600-21(GJC45-21), SGJ600-30(GJC100-30). Confirm the required duty point and operating margin with the project data before purchase.
Which truck, trailer or skid-mounted configuration is suitable?
For SGJ600 30D Electric drive cementing skid, the configuration must match transport limits, rig-up time, power availability and maintenance access. Confirm the preferred mounting form before final quotation.
Can the unit be configured for high-temperature or desert operations?
For SGJ600 30D Electric drive cementing skid, the working environment can change material grade, coating and service life. Confirm the ambient range and exposure conditions before the technical offer is released.
Direct inquiry
Send the SGJ600 30D Electric drive cementing skid requirement.
For SGJ600 30D Electric drive cementing skid, include the model, application, required duty, quantity and delivery destination. For a faster technical response, also include the working pressure and displacement; slurry density and mixing arrangement; truck, trailer or skid mounting.
Request product detailsConfiguration support
Need a different cementing pressure or displacement package for SGJ600 30D Electric drive cementing skid?
Share the working pressure, displacement, slurry design and mounting preference. We will help confirm the most suitable cementing configuration.